OpenWRT: Mengembalikan setting default Config.in

From OnnoWiki

Revision as of 11:00, 30 December 2013 by Onnowpurbo (talk | contribs) (→‎referensi)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Setting Original Config.in

Untuk mengembalikan setting Config.in ke kondisi semula dapat menggunakan perintah berikut,

~/openwrt/trunk> svn up
~/openwrt/trunk> rm .config
~/openwrt/trunk> make menuconfig

Untuk kemudian membuat image firmware dari scratch:

Referensi

http://wiki.openwrt.org/doc/howto/obtain.firmware.generate

Pranala Menarik

Build Firmware

APRX

IPv6

Flash Firmware

OpenWRT: Flash Linksys WRT54GL
OpenWRT: Flash Linksys WRT160NL
OpenWRT: Flash Buffalo WZRHP450H RECOMMENDED
OpenWRT: Flash Buffalo WZRHP300N
OpenWRT: Flash UBNT NanoStation2 RECOMMENDED
OpenWRT: Flash UBNT NanoStation M2 RECOMMENDED
OpenWRT: Flash UBNT NanoStation Loco M2
OpenWRT: Flash UBNT Bullet M2 RECOMMENDED
OpenWRT: Flash Mikrotik RB433 RECOMMENDED
OpenWRT: Flash Mikrotik RB450

Misc

OpenWRT: Setup WiFi
OpenWRT: Setup PPTP VPN Server
OpenWRT: Setup OLSR di UBNT via CLI RECOMMENDED
OpenWRT: Mikrotik RB433 RECOMMENDED
OpenWRT: Setup OLSR Sederhana
OpenWRT: Setup OLSR via Web RECOMMENDED
OLSR - di OpenWRT
OpenWRT: 3G modem
OpenWRT: Build Firmware dengan 3G Modem Support
OpenWRT: Setup Firewall
OpenWRT: Konfigurasi UBNT NanoStation2 tanpa WebGUI
OpenWRT: OLSR nameservice plugin

UBNT

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Mengembalikan_setting_default_Config.in&oldid=39100"