Difference between revisions of "Mikrotik: OSPF multi-area network"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 33: | Line 33: | ||
R1: | R1: | ||
| + | /routing ospf instance enable default | ||
/routing ospf area add name=area1 area-id=0.0.0.1 | /routing ospf area add name=area1 area-id=0.0.0.1 | ||
| − | |||
| − | |||
/routing ospf network add network=10.0.1.0/24 area=backbone | /routing ospf network add network=10.0.1.0/24 area=backbone | ||
/routing ospf network add network=10.1.1.0/30 area=area1 | /routing ospf network add network=10.1.1.0/30 area=area1 | ||
| Line 41: | Line 40: | ||
R2: | R2: | ||
| + | /routing ospf instance enable default | ||
/routing ospf area add name=area2 area-id=0.0.0.2 | /routing ospf area add name=area2 area-id=0.0.0.2 | ||
| − | |||
| − | |||
/routing ospf network add network=10.0.1.0/24 area=backbone | /routing ospf network add network=10.0.1.0/24 area=backbone | ||
/routing ospf network add network=10.1.2.0/30 area=area2 | /routing ospf network add network=10.1.2.0/30 area=area2 | ||
| Line 49: | Line 47: | ||
R3 configuration: | R3 configuration: | ||
| + | /routing ospf instance enable default | ||
/routing ospf area add name=area1 area-id=0.0.0.1 | /routing ospf area add name=area1 area-id=0.0.0.1 | ||
| − | |||
| − | |||
/routing ospf network add network=10.1.1.0/30 area=area1 | /routing ospf network add network=10.1.1.0/30 area=area1 | ||
R4 configuration: | R4 configuration: | ||
| + | /routing ospf instance enable default | ||
/routing ospf area add name=area2 area-id=0.0.0.2 | /routing ospf area add name=area2 area-id=0.0.0.2 | ||
| − | |||
| − | |||
/routing ospf network> add network=10.1.2.0/30 area=area2 | /routing ospf network> add network=10.1.2.0/30 area=area2 | ||
| − | |||
==Cek route== | ==Cek route== | ||
Revision as of 05:18, 15 November 2018
Setup IP address
R1:
/ip address add address=10.0.1.1/30 interface=ether1 /ip address add address=10.1.1.1/30 interface=ether2
R2:
/ip address add address=10.0.1.2/30 interface=ether1 /ip address add address=10.1.2.1/30 interface=ether2 /ip dhcp-client add interface=ether3 disabled=no # kalau ether3 DHCP client /ip firewall nat add chain=srcnat out-interface=ether3 action=masquareade /ip firewall nat print
R3:
/ip address add address=10.1.1.2/30 interface=ether1 /ip address add address=192.168.1.1/24 interface=ether2
R4:
/ip address add address=10.1.2.2/30 interface=ether1 /ip address add address=192.168.2.1/24 interface=ether2
Setup OSPF
R1:
/routing ospf instance enable default /routing ospf area add name=area1 area-id=0.0.0.1 /routing ospf network add network=10.0.1.0/24 area=backbone /routing ospf network add network=10.1.1.0/30 area=area1
R2:
/routing ospf instance enable default /routing ospf area add name=area2 area-id=0.0.0.2 /routing ospf network add network=10.0.1.0/24 area=backbone /routing ospf network add network=10.1.2.0/30 area=area2
R3 configuration:
/routing ospf instance enable default /routing ospf area add name=area1 area-id=0.0.0.1 /routing ospf network add network=10.1.1.0/30 area=area1
R4 configuration:
/routing ospf instance enable default /routing ospf area add name=area2 area-id=0.0.0.2 /routing ospf network> add network=10.1.2.0/30 area=area2
Cek route
R3:
/ip route print
Redistribute Connected
/routing ospf instance set 0 redistribute-connected=as-type-1 /routing ospf instance print
Cek
/ip route print