Difference between revisions of "Linux: Interface BONDING"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 20: | Line 20: | ||
modprobe --first-time bonding | modprobe --first-time bonding | ||
| + | modprobe bonding | ||
modinfo bonding | more | modinfo bonding | more | ||
| − | |||
| − | + | ==Edit Interface== | |
| − | + | sudo vi /etc/network/interfaces | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | # eth0 is manually configured, and slave to the "bond0" bonded NIC | ||
| + | auto eth0 | ||
| + | iface eth0 inet manual | ||
| + | bond-master bond0 | ||
| + | bond-primary eth0 | ||
| + | |||
| + | # eth1 ditto, thus creating a 2-link bond. | ||
| + | auto eth1 | ||
| + | iface eth1 inet manual | ||
| + | bond-master bond0 | ||
| + | |||
| + | # bond0 is the bonding NIC and can be used like any other normal NIC. | ||
| + | # bond0 is configured using static network information. | ||
| + | auto bond0 | ||
| + | iface bond0 inet static | ||
| + | address 192.168.1.10 | ||
| + | gateway 192.168.1.1 | ||
| + | netmask 255.255.255.0 | ||
| + | bond-mode active-backup | ||
| + | bond-miimon 100 | ||
| + | bond-slaves none | ||
==Aktifasi Bonding== | ==Aktifasi Bonding== | ||
| − | + | sudo start networking | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | ==Cek== | |
| − | + | cat /proc/net/bonding/bond0 | |
| − | + | ifconfig | |
==Referensi== | ==Referensi== | ||
Revision as of 05:43, 30 September 2019
Sumber: https://help.ubuntu.com/community/UbuntuBonding
Aktifkan Module
sudo su vi /etc/modules
# /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. loop lp rtc bonding
Aktifkan module
modprobe --first-time bonding modprobe bonding modinfo bonding | more
Edit Interface
sudo vi /etc/network/interfaces
# eth0 is manually configured, and slave to the "bond0" bonded NIC
auto eth0
iface eth0 inet manual
bond-master bond0
bond-primary eth0
# eth1 ditto, thus creating a 2-link bond.
auto eth1
iface eth1 inet manual
bond-master bond0
# bond0 is the bonding NIC and can be used like any other normal NIC.
# bond0 is configured using static network information.
auto bond0
iface bond0 inet static
address 192.168.1.10
gateway 192.168.1.1
netmask 255.255.255.0
bond-mode active-backup
bond-miimon 100
bond-slaves none
Aktifasi Bonding
sudo start networking
Cek
cat /proc/net/bonding/bond0
ifconfig