Difference between revisions of "VyOS: OSPF Sederhana"

From OnnoWiki
Jump to navigation Jump to search
(Created page with " center|900px|thumb ==Sambungan== R1 eth0: -- R3: eth0 eth1: -- R2: eth0 eth2: -- Internet R2: eth0: -- R1: eth1 eth1: -- R3: eth1 eth2:...")
 
Line 26: Line 26:
 
==IP address==
 
==IP address==
  
−
Router1:
+
R1:
  
−
  /ip address add address=10.10.1.1/30 interface=ether1
+
  configure
−
  /ip address add address=10.10.1.5/30 interface=ether2
+
set interfaces ethernet eth1 address '10.10.1.1/30'
−
  /ip address add address=192.168.122.100/24 interface=ether3
+
  set interfaces ethernet eth2 address '10.10.1.5/30'
−
  /ip address add address=192.168.122.101/24 interface=ether3
+
  set interfaces ethernet eth3 address '192.168.122.100/24'
−
  /ip address add address=192.168.122.102/24 interface=ether3
+
  set interfaces ethernet eth3 address '192.168.122.101/24'
−
  # /ip dhcp-client add interface=ether3 disabled=no        # kalau ether3 DHCP client
+
  set interfaces ethernet eth3 address '192.168.122.102/24'
 +
 
 +
  show
 +
commit
 +
exit
  
−
/ip firewall nat add chain=srcnat out-interface=ether3 action=masquareade
 
−
/ip firewall nat print
 
  
 
Router2:
 
Router2:
  
−
  /ip address add address=10.10.1.6/30 interface=ether1
+
  configure
−
  /ip address add address=10.10.1.9/30 interface=ether2
+
set interfaces ethernet eth1 address '10.10.1.6/30'
−
  /ip address add address=172.16.1.1/16 interface=ether3
+
  set interfaces ethernet eth2 address '10.10.1.9/30'
 +
  set interfaces ethernet eth3 address '172.16.1.1/16'
 +
 
 +
show
 +
commit
 +
exit
 +
 
  
 
Router3:
 
Router3:
  
−
  /ip address add address=10.10.1.2/30 interface=ether1
+
  configure
−
  /ip address add address=10.10.1.10/30 interface=ether2
+
set interfaces ethernet eth1 address '10.10.1.2/30'
−
  /ip address add address=192.168.1.1/24 interface=ether3
+
  set interfaces ethernet eth2 address '10.10.1.10/30'
 +
  set interfaces ethernet eth3 address '192.168.1.1/24'
 +
 
 +
show
 +
commit
 +
exit
  
 
==OSPF==
 
==OSPF==

Revision as of 09:37, 16 January 2019



Image6005.gif

Sambungan

R1
eth0: -- R3: eth0
eth1: -- R2: eth0
eth2: -- Internet

R2:
eth0: -- R1: eth1
eth1: -- R3: eth1
eth2: -- LAN 172.16.1.1/16

R3:
eth0: -- R1: eth0
eth1: -- R2: eth1
eth2: -- LAN 192.168.1.1/24


IP address

R1: 

configure
set interfaces ethernet eth1 address '10.10.1.1/30'
set interfaces ethernet eth2 address '10.10.1.5/30'
set interfaces ethernet eth3 address '192.168.122.100/24'
set interfaces ethernet eth3 address '192.168.122.101/24'
set interfaces ethernet eth3 address '192.168.122.102/24'

show
commit
exit


Router2: 

configure
set interfaces ethernet eth1 address '10.10.1.6/30'
set interfaces ethernet eth2 address '10.10.1.9/30'
set interfaces ethernet eth3 address '172.16.1.1/16'

show
commit
exit


Router3: 

configure
set interfaces ethernet eth1 address '10.10.1.2/30'
set interfaces ethernet eth2 address '10.10.1.10/30'
set interfaces ethernet eth3 address '192.168.1.1/24'

show
commit
exit

OSPF

Ada tiga (3) elemen dasar konfigurasi OSPF:

  • Enable OSPF instance
  • OSPF area configuration
  • OSPF network configuration

instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.


R1: 

# /routing ospf instance add name=default
/routing ospf instance set name=default router-id=10.10.1.1 numbers=0 
/routing ospf instance enable numbers=0
/routing ospf network add network=10.10.1.0/30 area=backbone
/routing ospf network add network=10.10.1.4/30 area=backbone

R2: 

# /routing ospf instance add name=default
/routing ospf instance set name=default router-id=10.10.1.6 numbers=0
/routing ospf instance enable numbers=0
/routing ospf network add network=10.10.1.4/30 area=backbone 
/routing ospf network add network=10.10.1.8/30 area=backbone 
/routing ospf network add network=172.16.0.0/16 area=backbone

R3: 

# /routing ospf instance add name=default
/routing ospf instance set name=default router-id=10.10.1.2 numbers=0
/routing ospf instance enable numbers=0
/routing ospf network add network=10.10.1.0/30 area=backbone 
/routing ospf network add network=10.10.1.8/30 area=backbone 
/routing ospf network add network=192.168.1.0/24 area=backbone

Cek 

/routing ospf instance print 

Flags: X - disabled 
 0   name="default" router-id=10.10.1.1 distribute-default=never 
     redistribute-connected=as-type-1 redistribute-static=as-type-1 
     redistribute-rip=no redistribute-bgp=no redistribute-other-ospf=no 
     metric-default=1 metric-connected=20 metric-static=20 metric-rip=20 
     metric-bgp=auto metric-other-ospf=auto in-filter=ospf-in out-filter=ospf-out



Verify

Cek

R1: 

/routing ospf interface print
/routing ospf neighbor print
/ip route print

Lakukan yang sama untuk R2, R3





Referensi


Pranala Menarik


Retrieved from "https://onnocenter.or.id/wiki/index.php?title=VyOS:_OSPF_Sederhana&oldid=54298"