Difference between revisions of "UBNT: Upload Firmware"

From OnnoWiki
Jump to navigation Jump to search
Line 19: Line 19:
 
  tftp> binary
 
  tftp> binary
 
  tftp> trace
 
  tftp> trace
−
  tftp> put openwrt-atheros-ubnt2-pico2-squashfs.bin flash_update
+
  tftp> put openwrt-atheros-ubnt2-squashfs.bin flash_update
 
  ..
 
  ..
 
  ..
 
  ..
Line 35: Line 35:
  
 
  ifconfig eth0 192.168.1.254
 
  ifconfig eth0 192.168.1.254
−
  cp  openwrt-atheros-ubnt2-pico2-squashfs.bin code.bin
+
  cp  openwrt-atheros-ubnt2-squashfs.bin code.bin
−
  echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput openwrt-atheros-ubnt2-pico2-squashfs.bin flash_update\n" | tftp 192.168.1.20
+
  echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput openwrt-atheros-ubnt2-squashfs.bin flash_update\n" | tftp 192.168.1.20
  
 
* lakukan chmod 777 shellscript.sh tersebut
 
* lakukan chmod 777 shellscript.sh tersebut

Revision as of 17:49, 10 April 2013

Teknik upload firmware sama dengan teknik recovery

  • Set IP PC 192.168.1.254/24
ifconfig eth0 192.168.1.254 netmask 255.255.255.0
  • Pindah ke folder tempat image, misalnya
~/openwrt.trunk/trunk/atheros/
  • Matikan Device UBNT
  • Tekan tombol Reset
  • Nyalakan Device UBNT
  • Lepaskan tombol Reset setelah ~10 detik (tidak lebih) sesudah device UBNT di nyalakan. Kita akan mengetahui-nya karena LED akan berubah.
  • Ping 192.168.1.20. Jika ada responds, kita siap untuk meng-upload image. Jika tidak maka mulai lagi dari awal.
  • tftp image menggunakan mode binary ke 192.168.1.20 sebagai 'flash_update', misalnya,
tftp 192.168.1.20
tftp> binary
tftp> trace
tftp> put openwrt-atheros-ubnt2-squashfs.bin flash_update
..
..
sent DATA <block=6228, 512 bytes>
received ACK <block=6228>
sent DATA <block=6229, 351 bytes>
received ACK <block=6229>
Sent 3189087 bytes in 23.6 seconds
tftp> quit


Coba Menggunakan Shell Scipt

  • Buat shell script sederhana isinya
ifconfig eth0 192.168.1.254
cp  openwrt-atheros-ubnt2-squashfs.bin code.bin
echo -e "binary\nrexmt 1\ntimeout 60\ntrace\nput openwrt-atheros-ubnt2-squashfs.bin flash_update\n" | tftp 192.168.1.20
  • lakukan chmod 777 shellscript.sh tersebut
  • Jalankan di folder tempat firmware berada
  • Nyalakan UBNT

Cek UBNT

  • Diamkan beberapa saat. Device jangan di apa-apakan.
  • Tunggu sekitar 1 menit-an
  • ping 192.168.1.20
  • Semoga ada responds :) ...

Pranala Menarik

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=UBNT:_Upload_Firmware&oldid=36594"