Difference between revisions of "VyOS: OSPF Sederhana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (→Verify) |
Onnowpurbo (talk | contribs) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 23: | Line 23: | ||
eth3: -- LAN 192.168.1.1/24 | eth3: -- LAN 192.168.1.1/24 | ||
| + | |||
| + | Setiap kali menjalankan VM VyOS di GNS3, lakukan | ||
| + | |||
| + | sudo chown root:useranda /dev/kvm | ||
| + | |||
| + | sebelum me-RUN setiap VM VyOS satu per satu. | ||
==IP address== | ==IP address== | ||
| Line 123: | Line 129: | ||
==Verify== | ==Verify== | ||
| − | Cek | + | Cek R1, R2, R3 |
| − | |||
| − | R1, R2, R3 | ||
| − | |||
show ip ospf database | show ip ospf database | ||
| Line 146: | Line 149: | ||
* [[Cisco]] | * [[Cisco]] | ||
* [[Juniper]] | * [[Juniper]] | ||
| − | * [[ | + | * [[BIRD1]] |
| + | * [[BIRD2]] | ||
* [[IPv6]] | * [[IPv6]] | ||
| Line 153: | Line 157: | ||
* [[IPv6: Advanced Routing]] | * [[IPv6: Advanced Routing]] | ||
* [[IPv6: Quagga]] | * [[IPv6: Quagga]] | ||
| + | * [[IPv6: VyOS]] | ||
* [[IPv6: Mikrotik]] | * [[IPv6: Mikrotik]] | ||
* [[IPv6: Cisco]] | * [[IPv6: Cisco]] | ||
* [[IPv6: Juniper]] | * [[IPv6: Juniper]] | ||
| − | * [[IPv6: | + | * [[IPv6: BIRD1]] |
| + | * [[IPv6: BIRD2]] | ||
* [[IPv6]] | * [[IPv6]] | ||
Latest revision as of 11:06, 20 January 2019
Sambungan
R1 eth1: -- R3: eth1 eth2: -- R2: eth1 eth3: -- Internet
R2: eth1: -- R1: eth2 eth2: -- R3: eth2 eth3: -- LAN 172.16.1.1/16
R3: eth1: -- R1: eth1 eth2: -- R2: eth2 eth3: -- LAN 192.168.1.1/24
Setiap kali menjalankan VM VyOS di GNS3, lakukan
sudo chown root:useranda /dev/kvm
sebelum me-RUN setiap VM VyOS satu per satu.
IP address
R1:
configure set interfaces ethernet eth1 address '10.10.1.1/30' set interfaces ethernet eth2 address '10.10.1.5/30' set interfaces ethernet eth3 address '192.168.122.100/24' set interfaces ethernet eth3 address '192.168.122.101/24' set interfaces ethernet eth3 address '192.168.122.102/24'
show commit exit
Router2:
configure set interfaces ethernet eth1 address '10.10.1.6/30' set interfaces ethernet eth2 address '10.10.1.9/30' set interfaces ethernet eth3 address '172.16.1.1/16'
show commit exit
Router3:
configure set interfaces ethernet eth1 address '10.10.1.2/30' set interfaces ethernet eth2 address '10.10.1.10/30' set interfaces ethernet eth3 address '192.168.1.1/24'
show commit exit
OSPF
Ada tiga (3) elemen dasar konfigurasi OSPF:
- Enable OSPF instance
- OSPF area configuration
- OSPF network configuration
instance name=default sudah ada, tidak perlu di tambahkan, tapi kalau perlu menambahkan caranya adalah sebagai berikut Catatan: Ingat bahwa backbone area-id adalah 0.0.0.0.
R1:
configure set protocols ospf area 0 network 10.10.1.0/30 set protocols ospf area 0 network 10.10.1.4/30 set protocols ospf log-adjacency-changes set protocols ospf parameters router-id 10.10.1.1
show show protocols commit exit
R2:
configure set protocols ospf area 0 network 10.10.1.4/30 set protocols ospf area 0 network 10.10.1.8/30 set protocols ospf area 0 network 172.16.0.0/16 set protocols ospf log-adjacency-changes set protocols ospf parameters router-id 10.10.1.6
show show protocols commit exit
R3:
configure set protocols ospf area 0 network 10.10.1.0/30 set protocols ospf area 0 network 10.10.1.8/30 set protocols ospf area 0 network 192.168.1.0/24 set protocols ospf log-adjacency-changes set protocols ospf parameters router-id 10.10.1.2
show show protocols commit exit
Verify
Cek R1, R2, R3
show ip ospf database show ip ospf neighbor show ip ospf route show ip route
Referensi
Pranala Menarik