Difference between revisions of "OpenWRT: Build Firmware dengan 3G Modem Support"

From OnnoWiki
Jump to navigation Jump to search
(New page: Wireless router with a 3G dongle and multiwan for failover on Wired, Wireless client (routed) and 3G Please check 3gdongle With this recipe you can create a wireless router which is conn...)
 
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
Wireless router with a 3G dongle and multiwan for failover on Wired, Wireless client (routed) and 3G
+
Tambahkan usb-modeswitch
  
−
Please check 3gdongle
+
./scripts/feeds update packages
 +
./scripts/feeds install usb-modeswitch usb-modeswitch-data usbutils multiwan
  
−
With this recipe you can create a wireless router which is connected to either a wired, a wireless or a 3G wireless connection. The multiwan package is used to do the failover between the three WAN variants.
+
Jalankan make menuconfig dan pilih,
  
−
I have this running on a ASUS WL-500g Premium v1 with an Atheros wireless card. The 3G dongle is a K3565-Z from Vodafone. Latest Backfire is used and build by myself from subversion without a WebUI.
+
Target System (Atheros AR7xxx/AR9xxx)
−
Building OpenWrt
+
Target Profile (Buffalo WZR-HP-G450H)
 +
 
 +
Base System
 +
    qos-scripts: <*>
  
−
     OpenWrt Buildroot – Installation
+
Network
−
     OpenWrt Buildroot – Usage
+
    multiwan: <*>
 +
    wpad: <*>
 +
    WWAN:
 +
        adb-enablemodem
 +
        comgt
 +
        comgt-directip
 +
        comgt-ncm
 +
        uqmi
 +
     chat
 +
     ppp
 +
        ppp-mod-pppoa
 +
        ppp-mod-pppoe
 +
        ppp-mod-pppol2tp
 +
        ppp-mod-pptp
 +
        ppp-mod-radius
 +
    ppp-multilink
 +
        pppdump
 +
        pppstats
  
−
svn checkout svn://svn.openwrt.org/openwrt/branches/backfire wl-500gpv1
+
 +
Utilities
 +
    usb-modeswitch: <*>
 +
        usb-modeswitch-data: <*>
 +
    usbutils: <*>
  
−
Backport the 6in4 package to Backfire:
 
  
−
svn export svn://svn.openwrt.org/openwrt/trunk/package/6in4 package/6in4; svn add package/6in4
+
Kernel Modules > USB Support >
 +
    kmod-usb-serial
 +
        kmod-usb-serial-ipw
 +
        kmod-usb-serial-option
 +
        kmod-usb-serial-qualcomm
 +
        kmod-usb-serial-wwan
 +
    kmod-usb-acm
 +
LuCI >
 +
      6. Protocols >
 +
luci-proto-3g
  
−
Checkout the packages feed and symlink (install in menuconfig) only usb-modeswitch, usb-modeswitch-data, usbutils and multiwan packages from the packages feed.
 
−
 
−
./scripts/feeds update packages
 
−
./scripts/feeds install usb-modeswitch usb-modeswitch-data usbutils multiwan
 
−
 
−
Now run make menuconfig and select at least the packages in the list below.
 
−
 
−
    Target System: Broadcom BCM947xx/953xx
 
−
    Target Profile: ASUS WL-500g Premium v1 (Atheros WiFi)
 
−
 
−
    Base System
 
−
        qos-scripts: <*>
 
−
 
−
    Network
 
−
        multiwan: <*>
 
−
        wpad: <*>
 
−
 
−
    Kernel modules
 
−
        USB Support
 
−
            kmod-usb-serial: <*>
 
−
                kmod-usb-serial-option: <*>
 
−
 
−
    Utilities
 
−
        comgt: <*>
 
−
        usb-modeswitch: <*>
 
−
            usb-modeswitch-data: <*>
 
−
        usbutils: <*>
 
−
 
−
Finally run make to build OpenWrt Backfire.
 
  
 +
==Referensi==
  
 +
* http://wiki.openwrt.org/doc/howtobuild/wireless-router-with-a-3g-dongle
  
 +
==Pranala Menarik==
  
−
 
+
* [[OpenWRT]]
−
==Referensi==
+
* [[OpenWRT: Source Repository Download]]
−
 
+
* [[OpenWRT: Melihat Daftar Package]]
−
* http://wiki.openwrt.org/doc/howtobuild/wireless-router-with-a-3g-dongle
+
* [[OpenWRT: Build Firmware]]
 +
* [[OpenWRT: Build Firmware Buffalo WZRHPG450H]]
 +
* [[OpenWRT: Build Firmware Ubiquiti NanoStation2]]
 +
* [[OpenWRT: Build Firmware Mikrotik RB433]]
 +
* [[OpenWRT: Mikrotik RB433]]
 +
* [[OpenWRT: 3G modem]]
 +
* [[OpenWRT: Build Firmware dengan 3G Modem Support]]
 +
* [[UBNT]]

Latest revision as of 17:21, 16 September 2019

Tambahkan usb-modeswitch 

./scripts/feeds update packages
./scripts/feeds install usb-modeswitch usb-modeswitch-data usbutils multiwan

Jalankan make menuconfig dan pilih, 

Target System (Atheros AR7xxx/AR9xxx)
Target Profile (Buffalo WZR-HP-G450H)
 
Base System
    qos-scripts: <*>

Network
    multiwan: <*>
    wpad: <*>
    WWAN:
        adb-enablemodem
        comgt
        comgt-directip
        comgt-ncm
        uqmi
   chat
   ppp
        ppp-mod-pppoa
        ppp-mod-pppoe
        ppp-mod-pppol2tp
        ppp-mod-pptp
        ppp-mod-radius
   ppp-multilink
        pppdump
        pppstats



Utilities
    usb-modeswitch: <*>
        usb-modeswitch-data: <*>
    usbutils: <*>



Kernel Modules > USB Support >
   kmod-usb-serial
        kmod-usb-serial-ipw
        kmod-usb-serial-option
        kmod-usb-serial-qualcomm
        kmod-usb-serial-wwan
   kmod-usb-acm
LuCI >
      6. Protocols >
	 luci-proto-3g


Referensi

Pranala Menarik

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=OpenWRT:_Build_Firmware_dengan_3G_Modem_Support&oldid=57174"