Difference between revisions of "Dial menggunakan WvDial"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
lakukan | lakukan | ||
| − | $ wvdialconf | + | $ sudo wvdialconf |
Akan tampak tampilan sebagai berikut | Akan tampak tampilan sebagai berikut | ||
| Line 45: | Line 45: | ||
Found a modem on /dev/ttyUSB0. | Found a modem on /dev/ttyUSB0. | ||
Modem configuration written to /etc/wvdial.conf. | Modem configuration written to /etc/wvdial.conf. | ||
| − | |||
| − | |||
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" | ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" | ||
ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" | ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" | ||
| Line 57: | Line 55: | ||
[Dialer xl3g] | [Dialer xl3g] | ||
| − | Phone = *99 | + | Phone = *99# |
Username = xlgprs | Username = xlgprs | ||
Password = proxl | Password = proxl | ||
| Line 70: | Line 68: | ||
Init5 =AT+CGDCONT=1,"IP","www.xlgprs.net"; | Init5 =AT+CGDCONT=1,"IP","www.xlgprs.net"; | ||
| − | Dial menggunakan | + | Dial menggunakan '''(harus sebagai SU)''' |
| + | |||
| + | $ sudo wvdial xl3g | ||
| + | # wvdial xl3g | ||
| + | |||
| + | Akan keluar seperti | ||
| + | |||
| + | --> WvDial: Internet dialer version 1.60 | ||
| + | --> Cannot get information for serial port. | ||
| + | --> Initializing modem. | ||
| + | --> Sending: ATZ | ||
| + | ATZ | ||
| + | OK | ||
| + | +ZUSIMR:2 | ||
| + | --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 | ||
| + | ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 | ||
| + | OK | ||
| + | --> Sending: AT+CGDCONT=1,"IP","www.xlgprs.net"; | ||
| + | AT+CGDCONT=1,"IP","www.xlgprs.net"; | ||
| + | OK | ||
| + | --> Modem initialized. | ||
| + | --> Sending: ATDT*99# | ||
| + | --> Waiting for carrier. | ||
| + | ATDT*99# | ||
| + | CONNECT | ||
| + | --> Carrier detected. Waiting for prompt. | ||
| − | |||
Latest revision as of 19:35, 20 January 2010
Setelah WvDial di instalasi. Pastikan modem usb terdeteksi system operasi
lsusb ls -la /dev/ttyU*
lakukan
$ sudo wvdialconf
Akan tampak tampilan sebagai berikut
Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. Modem Port Scan<*1>: S0 S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- OK ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED ttyUSB0<*1>: Speed 9600: AT -- OK ttyUSB0<*1>: Max speed is 9600; that should be safe. ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK WvModem<*1>: Cannot get information for serial port. ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. WvModem<*1>: Cannot get information for serial port. ttyUSB2<*1>: ATQ0 V1 E1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED ttyUSB2<*1>: Speed 9600: AT -- OK ttyUSB2<*1>: Max speed is 9600; that should be safe. ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Found a modem on /dev/ttyUSB0. Modem configuration written to /etc/wvdial.conf. ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
Edit wvdial.conf
sudo vi /etc/wvdial.conf
Tambahkan misalnya
[Dialer xl3g] Phone = *99# Username = xlgprs Password = proxl Stupid Mode = 1 Dial Command = ATDT Modem = /dev/ttyUSB0 Baud = 460800 Init2 = ATZ Init3 = ATE0V1&D2&C1S0=0+IFC=2,2 ISDN = 0 Modem Type = Analog Modem Init5 =AT+CGDCONT=1,"IP","www.xlgprs.net";
Dial menggunakan (harus sebagai SU)
$ sudo wvdial xl3g # wvdial xl3g
Akan keluar seperti
--> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK +ZUSIMR:2 --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CGDCONT=1,"IP","www.xlgprs.net"; AT+CGDCONT=1,"IP","www.xlgprs.net"; OK --> Modem initialized. --> Sending: ATDT*99# --> Waiting for carrier. ATDT*99# CONNECT --> Carrier detected. Waiting for prompt.