Difference between revisions of "Dial menggunakan WvDial"

From OnnoWiki
Jump to navigation Jump to search
(New page: Setelah WvDial di instalasi, lakukan $ wvdialconf Akan tampak tampilan sebagai berikut ==Pranala Menarik== * Instalasi WvDial * [[Dial menggunakan Modem]...)
 
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
−
Setelah [[Instalasi WvDial | WvDial di instalasi]], lakukan
+
Setelah [[Instalasi WvDial | WvDial di instalasi]].
 +
Pastikan modem usb terdeteksi [[system operasi]]
  
−
  $ wvdialconf
+
lsusb
 +
ls -la /dev/ttyU*
 +
 
 +
lakukan
 +
 
 +
  $ sudo wvdialconf
  
 
Akan tampak tampilan sebagai berikut
 
Akan tampak tampilan sebagai berikut
  
 +
Editing `/etc/wvdial.conf'.
 +
 +
Scanning your serial ports for a modem.
 +
 +
Modem Port Scan<*1>: S0  S1  S2  S3 
 +
WvModem<*1>: Cannot get information for serial port.
 +
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
 +
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
 +
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
 +
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
 +
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
 +
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
 +
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
 +
ttyUSB0<*1>: Speed 9600: AT -- OK
 +
ttyUSB0<*1>: Max speed is 9600; that should be safe.
 +
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
 +
WvModem<*1>: Cannot get information for serial port.
 +
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
 +
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
 +
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
 +
WvModem<*1>: Cannot get information for serial port.
 +
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
 +
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
 +
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
 +
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
 +
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
 +
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
 +
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
 +
ttyUSB2<*1>: Speed 9600: AT -- OK
 +
ttyUSB2<*1>: Max speed is 9600; that should be safe.
 +
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
 +
 +
Found a modem on /dev/ttyUSB0.
 +
Modem configuration written to /etc/wvdial.conf.
 +
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
 +
ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
 +
 +
Edit wvdial.conf
 +
 +
sudo vi /etc/wvdial.conf
 +
 +
Tambahkan misalnya
 +
 +
[Dialer xl3g]
 +
Phone = *99#
 +
Username = xlgprs
 +
Password = proxl
 +
Stupid Mode = 1
 +
Dial Command = ATDT
 +
Modem = /dev/ttyUSB0
 +
Baud = 460800
 +
Init2 = ATZ
 +
Init3 = ATE0V1&D2&C1S0=0+IFC=2,2
 +
ISDN = 0
 +
Modem Type = Analog Modem
 +
Init5 =AT+CGDCONT=1,"IP","www.xlgprs.net";
 +
 +
Dial menggunakan '''(harus sebagai SU)'''
 +
 +
$ sudo wvdial xl3g
 +
# wvdial xl3g
 +
 +
Akan keluar seperti
 +
 +
--> WvDial: Internet dialer version 1.60
 +
--> Cannot get information for serial port.
 +
--> Initializing modem.
 +
--> Sending: ATZ
 +
ATZ
 +
OK
 +
+ZUSIMR:2
 +
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
 +
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
 +
OK
 +
--> Sending: AT+CGDCONT=1,"IP","www.xlgprs.net";
 +
AT+CGDCONT=1,"IP","www.xlgprs.net";
 +
OK
 +
--> Modem initialized.
 +
--> Sending: ATDT*99#
 +
--> Waiting for carrier.
 +
ATDT*99#
 +
CONNECT
 +
--> Carrier detected.  Waiting for prompt.
  
  
Line 10: Line 99:
 
==Pranala Menarik==
 
==Pranala Menarik==
  
 +
* [[Instalasi USB mode switch untuk USB Modem yang ada Storage]]
 
* [[Instalasi WvDial]]
 
* [[Instalasi WvDial]]
 
* [[Dial menggunakan Modem]]
 
* [[Dial menggunakan Modem]]

Latest revision as of 19:35, 20 January 2010

Setelah WvDial di instalasi. Pastikan modem usb terdeteksi system operasi 

lsusb
ls -la /dev/ttyU*

lakukan 

$ sudo wvdialconf

Akan tampak tampilan sebagai berikut 

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0   S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
ttyUSB0<*1>: Speed 9600: AT -- OK
ttyUSB0<*1>: Max speed is 9600; that should be safe.
ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: ZTE INCORPORATED
ttyUSB2<*1>: Speed 9600: AT -- OK
ttyUSB2<*1>: Max speed is 9600; that should be safe.
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK 

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

Edit wvdial.conf 

sudo vi /etc/wvdial.conf

Tambahkan misalnya 

[Dialer xl3g]
Phone = *99#
Username = xlgprs
Password = proxl
Stupid Mode = 1
Dial Command = ATDT
Modem = /dev/ttyUSB0
Baud = 460800
Init2 = ATZ
Init3 = ATE0V1&D2&C1S0=0+IFC=2,2
ISDN = 0
Modem Type = Analog Modem
Init5 =AT+CGDCONT=1,"IP","www.xlgprs.net";

Dial menggunakan (harus sebagai SU) 

$ sudo wvdial xl3g
# wvdial xl3g

Akan keluar seperti 

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
+ZUSIMR:2
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","www.xlgprs.net";
AT+CGDCONT=1,"IP","www.xlgprs.net";
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected.  Waiting for prompt.


Pranala Menarik

Retrieved from "https://onnocenter.or.id/wiki/index.php?title=Dial_menggunakan_WvDial&oldid=14261"