Difference between revisions of "Ipref"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) (New page: 53 down vote accepted I use iperf. It's a client server arrangement in that you run it in server mode at one end and connect to its from another computer on the other side of the netwo...) |
Onnowpurbo (talk | contribs) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | Topologi: | |
| − | + | * Sebuah Server (misalnya 192.168.0.100) | |
| + | * Sebuah Client (misalnya 192.168.0.101) | ||
| + | * tersambung melalui jaringan | ||
| + | * Firewall terbuka untuk port 5001 | ||
| − | |||
| − | + | Pada kedua mesin, install iperf | |
| − | sudo apt-get install iperf | + | sudo apt-get install iperf |
| − | |||
| − | + | ==Di Sisi Server== | |
| − | + | Pada Server: | |
| − | iperf - | + | iperf -s |
| − | + | Akan keluar | |
| − | + | ------------------------------------------------------------ | |
| − | ------------------------------------------------------------ | + | Server listening on TCP port 5001 |
| − | + | TCP window size: 85.3 KByte (default) | |
| − | TCP window size: | + | ------------------------------------------------------------ |
| − | ------------------------------------------------------------ | ||
| − | |||
| − | |||
| − | |||
| − | + | ||
| + | ==Di Sisi Client== | ||
| + | |||
| + | dan pada Client: | ||
| + | |||
| + | iperf -c <address dari server> | ||
| + | |||
| + | iperf -c 192.168.0.100 (dalam hal ini) | ||
| + | |||
| + | Anda akan melihat (kira-kira), | ||
| + | |||
| + | ------------------------------------------------------------ | ||
| + | Client connecting to 192.168.0.100, TCP port 5001 | ||
| + | TCP window size: 85.0 KByte (default) | ||
| + | ------------------------------------------------------------ | ||
| + | [ 3] local 192.168.0.101 port 39467 connected with 192.168.0.100 port 5001 | ||
| + | [ ID] Interval Transfer Bandwidth | ||
| + | [ 3] 0.0-10.0 sec 1.48 GBytes 1.27 Gbits/sec | ||
| + | |||
| + | |||
| + | Jika port 5001 terkena firewall, kita dapat mengubahnya melalui -p flag. | ||
| Line 33: | Line 50: | ||
==Referensi== | ==Referensi== | ||
| + | * https://www.linode.com/docs/networking/diagnostics/install-iperf-to-diagnose-network-speed-in-linux/ | ||
* http://askubuntu.com/questions/7976/how-do-you-test-the-network-speed-betwen-two-boxes | * http://askubuntu.com/questions/7976/how-do-you-test-the-network-speed-betwen-two-boxes | ||
Latest revision as of 07:24, 17 December 2022
Topologi:
- Sebuah Server (misalnya 192.168.0.100)
- Sebuah Client (misalnya 192.168.0.101)
- tersambung melalui jaringan
- Firewall terbuka untuk port 5001
Pada kedua mesin, install iperf
sudo apt-get install iperf
Di Sisi Server
Pada Server:
iperf -s
Akan keluar
------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------
Di Sisi Client
dan pada Client:
iperf -c <address dari server>
iperf -c 192.168.0.100 (dalam hal ini)
Anda akan melihat (kira-kira),
------------------------------------------------------------ Client connecting to 192.168.0.100, TCP port 5001 TCP window size: 85.0 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.0.101 port 39467 connected with 192.168.0.100 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.48 GBytes 1.27 Gbits/sec
Jika port 5001 terkena firewall, kita dapat mengubahnya melalui -p flag.