Difference between revisions of "Cisco: Static Routing Sedehana"
Jump to navigation
Jump to search
Onnowpurbo (talk | contribs) |
Onnowpurbo (talk | contribs) |
||
| Line 75: | Line 75: | ||
Router1: | Router1: | ||
| − | |||
| − | |||
| + | Using NAT to Allow Internal Users Access to the Internet | ||
| + | Perform this task to allow your internal users access to the Internet and conserve addresses in the inside global address pool using overloading of global addresses. | ||
| + | |||
| + | SUMMARY STEPS | ||
| + | |||
| + | enable | ||
| + | configure terminal | ||
| + | ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length } | ||
| + | access-list access-list-number permit source [source-wildcard ] | ||
| + | ip nat inside source list access-list-number pool name overload | ||
| + | interface type number | ||
| + | ip address ip-address mask | ||
| + | ip nat inside | ||
| + | exit | ||
| + | interface type number | ||
| + | ip address ip-address mask | ||
| + | ip nat outside | ||
| + | end | ||
| + | |||
| + | |||
| + | |||
| + | ===Referensi=== | ||
| + | |||
| + | * https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/15-mt/nat-15-mt-book/iadnat-addr-consv.html | ||
==Setting Client== | ==Setting Client== | ||
Revision as of 05:51, 22 December 2018
R1:
Ethernet1/1 - ke Internet Ethernet1/2 - R2: Ethernet 1/1 Ethernet1/3 - LAN
R2:
Ethernet1/1 - R1: Ethernet1/2 Ethernet1/2 - LAN
R1:
enable
configure terminal
interface ethernet1/1
ip address 10.1.1.2 255.255.255.0 # static ke internet
ip address dhcp # dhcp ke internet
no shutdown
exit
interface ethernet1/2
ip address 172.16.1.1 255.255.255.252
no shutdown
exit
interface ethernet1/3
ip address 192.168.1.1 255.255.255.0
no shutdown
exit
ip route 192.168.2.0 255.255.255.0 172.16.1.2
exit
copy running-config startup-config
R2:
enable
config terminal
interface ethernet1/1
ip address 172.16.1.2 255.255.255.252
no shutdown
exit
interface ethernet1/2
ip address 192.168.2.1 255.255.255.0
no shutdown
exit
ip route 192.168.1.0 255.255.255.0 172.16.1.1
ip route 0.0.0.0 0.0.0.0 172.16.1.1
exit
copy running-config startup-config
Request DHCP
enable
config terminal
interface ethernet1/1
ip dhcp client request
exit
exit
Test
R1:
ping 192.168.2.1
R2:
ping 192.168.1.1
Tambahan Kalau Membutuhkan NAT
Router1:
Using NAT to Allow Internal Users Access to the Internet
Perform this task to allow your internal users access to the Internet and conserve addresses in the inside global address pool using overloading of global addresses.
SUMMARY STEPS
enable
configure terminal
ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length }
access-list access-list-number permit source [source-wildcard ]
ip nat inside source list access-list-number pool name overload
interface type number
ip address ip-address mask
ip nat inside
exit
interface type number
ip address ip-address mask
ip nat outside
end
Referensi
Setting Client
LAN 1 Client:
ip 192.168.1.2 gw 192.168.1.1
LAN 2 Client:
ip 192.168.2.2 gw 192.168.2.1