Difference between revisions of "OpenWRT IPv6: Konfigurasi OLSR 6and4"

Revision as of 13:07, 7 September 2014

Sumber: https://dev.openwrt.org/ticket/4803

Agar OLSR dapat beroperasi sekaligus untuk IPv4 & IPv6 kita harus menggunakan IpVersion '6and4'. Kita dapat mengedit file

/etc/config/olsrd

Misalnya, sebagai berikut

config olsrd
       # uncomment the following line to use a custom config file instead:
       #option config_file '/etc/olsrd.conf'

       option IpVersion '6and4'

config Interface
       list interface 'ninuxif'

config 'Hna4'
       option 'netaddr' '192.168.1.0'
       option 'netmask' '255.255.255.0'

config 'Hna6'
       option 'netaddr' '2002::'
       option 'prefix' '64'

cocokan dengan kondisi jaringan anda :)

Referensi

https://dev.openwrt.org/ticket/4803

@@ Line 2: / Line 2: @@
+Agar OLSR dapat beroperasi sekaligus untuk IPv4 & IPv6 kita harus menggunakan IpVersion '6and4'.
+Kita dapat mengedit file
-I'm testing the olsr 6and4 configuration.
+ /etc/config/olsrd
-I'm using OpenWRT 8.09 branch with latest packages as 19/03/09
+Misalnya, sebagai berikut
-Looks like there is a bug when the configuration has HNA entries. The
-problem is that both the generated /var/etc/olsrd.conf and
-/var/etc/olsrd.conf.ipv4 contain hna4 and hna6 entries.
-If you have a hna4 entry this will result in the IPv6 olsr daemon not
-working, with the following error printed:
-IPv4 addresses can only be used if "IpVersion" == 4
-No interfaces configured!
-Bad configuration!
-No interfaces detected! This might be intentional, but it also might
-mean that your configuration is fubar.
-I will continue after 5 seconds...
-If you have a hna6 entry this will result in the IPv4 olsr daemon not working.
-IPv6 addresses can only be used if "IpVersion" == 6
-No interfaces configured!
-Bad configuration!
-No interfaces detected! This might be intentional, but it also might
-mean that your configuration is fubar.
-I will continue after 5 seconds...
-If you have both hna4 and hna6 entries this will result in both IPv4
-and IPv6 olsr not working.
-The not working olsr will keep running but with no interface configured.
-To solve the problem you should have only hna4 entries in
-/var/etc/olsrd.conf.ipv4 and only hna6 entries in /var/etc/olsrd.conf
-Here is my uci configuration. Let me know if you can reproduce the bug.
-config olsrd
-       # uncomment the following line to use a custom config file instead:
-       #option config_file '/etc/olsrd.conf'
-       option IpVersion '6and4'
-config Interface
-       list interface 'ninuxif'
-config 'Hna4'
-       option 'netaddr' '192.168.1.0'
-       option 'netmask' '255.255.255.0'
-config 'Hna6'
-       option 'netaddr' '2002::'
-       option 'prefix' '64'
+ config olsrd
+        # uncomment the following line to use a custom config file instead:
+        #option config_file '/etc/olsrd.conf'
+        option IpVersion '6and4'
+ config Interface
+        list interface 'ninuxif'
+ config 'Hna4'
+        option 'netaddr' '192.168.1.0'
+        option 'netmask' '255.255.255.0'
+ config 'Hna6'
+        option 'netaddr' '2002::'
+        option 'prefix' '64'
+cocokan dengan kondisi jaringan anda :)
 ==Referensi==
 * https://dev.openwrt.org/ticket/4803

Difference between revisions of "OpenWRT IPv6: Konfigurasi OLSR 6and4"

Revision as of 13:07, 7 September 2014

Referensi

Navigation menu

Search