Difference between revisions of "Buffalo: WZRHPG450H Cara Recovery"

Revision as of 09:11, 22 July 2012

To perform a TFTP recovery on this model:

ifconfig eth0:11 192.168.11.2

sudo arp -s 192.168.11.1 02:aa:bb:cc:dd:23

tftp 192.168.11.1
tftp> binary
tftp> trace
tftp> put openwrt-ar71xx-generic-wzr-hp-g450h-squashfs-tftp.bin

curl -T openwrt-ar71xx-generic-wzr-hp-g450h-squashfs-tftp.bin tftp://192.168.11.1

Jika terjadi kesalahan maka

Lampu merah diag akan langsung nyala saat boot
Lampu merah diag akan nyala terus
Flash gagal.
Gunakan tftp di atas untuk me-recover, gunakan buffalo factory image dengan file extensions 'enc'
Kita tidak perlu menyolder apa-apa atau beli router baru

@@ Line 11: / Line 11: @@
 * TFTP the image during the 4 second window and wait
-Cara yang lebih baik
+ tftp 192.168.11.1
+ tftp> binary
+ tftp> trace
+ tftp> put openwrt-ar71xx-generic-wzr-hp-g450h-squashfs-tftp.bin
- curl -T openwrt-ar71xx-generic-wzr-hp-g300nh-squashfs-tftp.bin tftp://192.168.11.1
+* Menggunakan Curl tampaknya lebih effisien
+ curl -T openwrt-ar71xx-generic-wzr-hp-g450h-squashfs-tftp.bin tftp://192.168.11.1
-If something goes wrong, and the red diag light goes on immediately at boot time and stays on indefinitely, your flash may have failed. You can use the TFTP method to recover the router, but you have to use the buffalo factory image that has the file extension 'enc'. This will bring you back the the factory firmware, but you won't have to solder anything or buy a new router.
+==Jika Terjadi Kesalahan==
+Jika terjadi kesalahan maka
+* Lampu merah diag akan langsung nyala saat boot
+* Lampu merah diag akan nyala terus
+* Flash gagal.
+* Gunakan tftp di atas untuk me-recover, gunakan buffalo factory image dengan file extensions 'enc'
+* Kita tidak perlu menyolder apa-apa atau beli router baru