Onnowpurbo at 02:26, 18 July 2015

2015-07-18T02:26:25Z

Onnowpurbo at 02:23, 18 July 2015

2015-07-18T02:23:22Z

Onnowpurbo at 10:00, 16 July 2015

2015-07-16T10:00:23Z

Onnowpurbo: New page: See either the /etc/chilli/defaults or /usr/local/etc/chilli/defaults (depending on how you installed chilli) file for details on possible configurations. Copy this file to config (in the ...

2015-01-17T00:06:59Z

New page: See either the /etc/chilli/defaults or /usr/local/etc/chilli/defaults (depending on how you installed chilli) file for details on possible configurations. Copy this file to config (in the ...

New page

See either the /etc/chilli/defaults or /usr/local/etc/chilli/defaults (depending on how you installed chilli) file for details on possible configurations. Copy this file to config (in the same directory) and edit the settings. To load the settings and start chilli, run "/etc/init.d/chilli start". This will generate main.conf, local.conf, and hs.conf files in "/etc/chilli/" or "/local/sbin/chilli/" for you. In order to make changes to the settings at a later date, rerun chilli start.

Per default, it is assumed that Ethernet device eth0 is your connection to the Internet and eth1 is the interface you want to have clients (subscribers) on. If this is not the case, then change the HS_WANIF configuration to be your Internet connected device and HS_LANIF to be your WiFi device, for example. With the right devices configured, restart chilli and you are on your way.

==Referensi==

* http://www.hotspotsystem.com/installation-guide-openwrt
* http://coova.org/CoovaChilli/Documentation

@@ Line 1: / Line 1: @@
 Download required Packages
 . Download openwrt-ar71xx-generic-tl-mr3220-v1-squashfs-factory.bin from http://downloads.openwrt.org/snapshots/trunk/ar71xx/.
@@ Line 189: / Line 187: @@
      Back in your computer, download CoovaChilli's source code
-  wget http://ap.coova.org/chilli/coova-chilli-1.2.9.tar.gz
+  wget http://ap.coova.org/chilli/coova-chilli-1.3.0.tar.gz
   Untar the package
-  tar -xzvf coova-chilli-1.2.9.tar.gz
+  tar -xzvf coova-chilli-1.3.0.tar.gz
   Goto the miniportal folder
-  cd coova-chilli-1.2.9/miniportal
+  cd coova-chilli-1.3.0/miniportal
   Edit the files functions.sh.in, config-local.sh.in, uam.sh.in and replace @SBINDIR@ and @ETCCHILLI@ with /usr/sbin and /etc/chilli respectively
   Rename the files that end in ".in", removing ".in" part

@@ Line 1: / Line 1: @@
@@ Line 13: / Line 5: @@
 . Download the following from http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/
-     coova-chilli_1.2.9-1_ar71xx.ipk
+Packages yang dibutuhkan
-     haserl_0.9.29-1_ar71xx.ipk
-     kmod-tun_3.3.8-1_ar71xx.ipk
+     coova-chilli
-     libpthread_0.9.33.2-1_ar71xx.ipk
+     haserl
-     librt_0.9.33.2-1_ar71xx.ipk
+     kmod-tun
 Flash OpenWRT for MR3220
-    Use a LAN cable to connect your computer to one of the LAN ports of the router
+* Use a LAN cable to connect your computer to one of the LAN ports of the router
-    Start a browser and go to http://192.168.1.1 (this is the router's default IP address, change this accordingly if you already changed your router's IP address)
+* Start a browser and go to http://192.168.1.1 (this is the router's default IP address, change this accordingly if you already changed your router's IP address)
-    Choose System Tools --> Firmware Upgrade
+* Choose System Tools --> Firmware Upgrade
-    Click the Browse button
+* Click the Browse button
-    Locate and select openwrt-ar71xx-generic-tl-mr3220-v1-squashfs-factory.bin file
+* Locate and select openwrt-ar71xx-generic-tl-mr3220-v1-squashfs-factory.bin file
-    Click the Upgrade button
+* Click the Upgrade button
-    Wait until it says rebooting
+* Wait until it says rebooting
 In this stage OpenWRT is already installed in your router and you will not be able to access your router’s web interface
@@ Line 62: / Line 56: @@
      Login to the router using ssh
-    ssh root@192.168.1.1
+ ssh root@192.168.1.1
-    Edit /etc/config/wireless
-    vi /etc/config/wireless
+Edit /etc/config/wireless
-    Comment or delete the line “option disabled 1” to enable wireless LAN
-    Optionally change the SSID by changing the value of “option ssid”, from OpenWRT to your choice
+ vi /etc/config/wireless
-    Save and close the file
-    Execute wifi to force the system to re-read the wireless configuration file and start wireless LAN
+Comment or delete the line “option disabled 1” to enable wireless LAN
 Install CoovaChilli
-    Go to your computer’s terminal and copy the rest of the packages to router’s /tmp directory
+Go to your computer’s terminal and copy the rest of the packages to router’s /tmp directory
-    scp coova-chilli_1.2.9-1_ar71xx.ipk haserl_0.9.29-1_ar71xx.ipk kmod-tun_3.3.8-1_ar71xx.ipk libpthread_0.9.33.2-1_ar71xx.ipk librt_0.9.33.2-1_ar71xx.ipk root@192.168.1.1:/tmp
+ scp coova-chilli_1.2.9-1_ar71xx.ipk haserl_0.9.29-1_ar71xx.ipk kmod-tun_3.3.8-1_ar71xx.ipk libpthread_0.9.33.2-1_ar71xx.ipk librt_0.9.33.2-1_ar71xx.ipk root@192.168.1.1:/tmp
-    Log back in to the router
-    ssh root@192.168.1.1
+Log back in to the router
-    Go to /tmp and install the packages in the following order
+ ssh root@192.168.1.1
-    opkg install librt_0.9.33.2-1_ar71xx.ipk
-    opkg install libpthread_0.9.33.2-1_ar71xx.ipk
+Go to /tmp and install the packages in the following order
-    opkg install kmod-tun_3.3.8-1_ar71xx.ipk
-    opkg install coova-chilli_1.2.9-1_ar71xx.ipk
+ opkg install librt_0.9.33.2-1_ar71xx.ipk
-    opkg install haserl_0.9.29-1_ar71xx.ipk
+ opkg install libpthread_0.9.33.2-1_ar71xx.ipk
 Setup CoovaChilli
@@ Line 179: / Line 179: @@
 Create a symbolic link to /etc/init.d/chilli in /etc/rc.d and name it S60chilli
-cd /etc/rc.d
+ cd /etc/rc.d
-ln -s ../init.d/chilli S60chilli
+ ln -s ../init.d/chilli S60chilli
 This will automatically start CoovaChilli everytime you start your router.
@@ Line 188: / Line 188: @@
      Back in your computer, download CoovaChilli's source code
-    wget http://ap.coova.org/chilli/coova-chilli-1.2.9.tar.gz
-    Untar the package
+ wget http://ap.coova.org/chilli/coova-chilli-1.2.9.tar.gz
-    tar -xzvf coova-chilli-1.2.9.tar.gz
+ Untar the package
-    Goto the miniportal folder
+ tar -xzvf coova-chilli-1.2.9.tar.gz
-    cd coova-chilli-1.2.9/miniportal
+ Goto the miniportal folder
-    Edit the files functions.sh.in, config-local.sh.in, uam.sh.in and replace @SBINDIR@ and @ETCCHILLI@ with /usr/sbin and /etc/chilli respectively
+ cd coova-chilli-1.2.9/miniportal
-    Rename the files that end in ".in", removing ".in" part
+ Edit the files functions.sh.in, config-local.sh.in, uam.sh.in and replace @SBINDIR@ and @ETCCHILLI@ with /usr/sbin and /etc/chilli respectively
-    e.g. functions.sh.in will be renamed to functions.sh
+ Rename the files that end in ".in", removing ".in" part
-    Copy the contents of miniportal folder to your router's /etc/chilli/www
+ Copy the contents of miniportal folder to your router's /etc/chilli/www
-    scp * root@192.168.1.1:/etc/chilli/www/
+ scp * root@192.168.1.1:/etc/chilli/www/

OpenWRT: Setup Coova-Chilli - Revision history

Onnowpurbo at 02:26, 18 July 2015

Onnowpurbo at 02:23, 18 July 2015

Onnowpurbo at 10:00, 16 July 2015

Onnowpurbo: New page: See either the /etc/chilli/defaults or /usr/local/etc/chilli/defaults (depending on how you installed chilli) file for details on possible configurations. Copy this file to config (in the ...