Onnowpurbo at 09:48, 30 May 2018

2018-05-30T09:48:58Z

Onnowpurbo: Created page with "// time ntp RTC DS1302 set #include #include #include #include #include // Init the DS1302 // DS1302 rtc([CE/RST], [..."

2018-05-30T09:47:15Z

Created page with "// time ntp RTC DS1302 set #include <Time.h> #include <SPI.h> #include <Ethernet.h> #include <EthernetUdp.h> #include <DS1302.h> // Init the DS1302 // DS1302 rtc([CE/RST], [..."

New page

// time ntp RTC DS1302 set

#include <Time.h>
#include <SPI.h>
#include <Ethernet.h>
#include <EthernetUdp.h>
#include <DS1302.h>

// Init the DS1302
// DS1302 rtc([CE/RST], [I/O], [CLOCK]);
DS1302 rtc(8, 7, 6);

// Ethernet library configuration
byte mac[] = { 0x24, 0x7B, 0xA2, 0x4A, 0x52, 0x10 };
IPAddress timeServer(128, 138, 140, 44 ); // time.nist.gov

unsigned int localPort = 8888;
const int NTP_PACKET_SIZE= 48;
byte packetBuffer[NTP_PACKET_SIZE];
EthernetUDP Udp;

void setup() {
// Set the clock to run-mode, and disable the write protection
rtc.halt(false);
rtc.writeProtect(false);

// Setup Communication
Serial.begin(9600);
Ethernet.begin(mac);
Udp.begin(localPort);

Serial.print("get time");
setSyncInterval(10); // Set seconds between re-sync
getNtpTime;

// The following lines can be commented out to use the values already stored in the DS1302
rtc.setDOW(WEDNESDAY); // Set Day-of-Week to MONDAY
// rtc.setTime(13, 0, 0); // Set the time to 12:00:00 (24hr format)
rtc.setDate(30, 5, 2018); // Set the date to Feb 2, 2016
}

void loop() {
setSyncProvider(getNtpTime);

rtc.setTime(hour()+7, minute(), second());

// Send Day-of-Week
Serial.print(rtc.getDOWStr());
Serial.print(" ");

// Send date
Serial.print(rtc.getDateStr());
Serial.print(" -- ");

// Send time
Serial.println(rtc.getTimeStr());

getNtpTime;
// delay(1000);
}

/*-------- NTP code ----------*/

unsigned long getNtpTime()
{
sendNTPpacket(timeServer); // send an NTP packet to a time server
delay(500);

if ( Udp.parsePacket() ) {
Udp.read(packetBuffer,NTP_PACKET_SIZE);
unsigned long hi = word(packetBuffer[40], packetBuffer[41]);
unsigned long low = word(packetBuffer[42], packetBuffer[43]);
unsigned long secsSince1900 = hi << 16 | low;
const unsigned long seventyYears = 2208988800UL;
unsigned long epoch = secsSince1900 - seventyYears;
return epoch;
}
return 0; // return 0 if unable to get the time
}

unsigned long sendNTPpacket(IPAddress& address)
{
memset(packetBuffer, 0, NTP_PACKET_SIZE); // set all bytes in the buffer to 0

// Initialize values needed to form NTP request
packetBuffer[0] = B11100011; // LI, Version, Mode
packetBuffer[1] = 0; // Stratum
packetBuffer[2] = 6; // Max Interval between messages in seconds
packetBuffer[3] = 0xEC; // Clock Precision
// bytes 4 - 11 are for Root Delay and Dispersion and were set to 0 by memset
packetBuffer[12] = 49; // four-byte reference ID identifying
packetBuffer[13] = 0x4E;
packetBuffer[14] = 49;
packetBuffer[15] = 52;

// send the packet requesting a timestamp:
Udp.beginPacket(address, 123); //NTP requests are to port 123
Udp.write(packetBuffer,NTP_PACKET_SIZE);
Udp.endPacket();
}

@@ Line 1: / Line 1: @@
-// time ntp RTC DS1302 set
+==Code==
-#include <Time.h>
+ // time ntp RTC DS1302 set
 #include <SPI.h>
-#include <Ethernet.h>
+ #include <Time.h>
-#include <EthernetUdp.h>
+ #include <SPI.h>
-#include <DS1302.h>
+ #include <Ethernet.h>
+ #include <EthernetUdp.h>
-// Init the DS1302
+ #include <DS1302.h>
 // DS1302 rtc([CE/RST], [I/O], [CLOCK]);
-DS1302 rtc(8, 7, 6);
+ // Init the DS1302
+ // DS1302 rtc([CE/RST], [I/O], [CLOCK]);
-// Ethernet library configuration
+ DS1302 rtc(8, 7, 6);
 byte mac[] = { 0x24, 0x7B, 0xA2, 0x4A, 0x52, 0x10 };
-IPAddress timeServer(128, 138, 140, 44 ); // time.nist.gov
+ // Ethernet library configuration
+ byte mac[] = { 0x24, 0x7B, 0xA2, 0x4A, 0x52, 0x10 };
-unsigned int localPort = 8888;
+ IPAddress timeServer(128, 138, 140, 44 ); // time.nist.gov
 const int NTP_PACKET_SIZE= 48;
-byte packetBuffer[NTP_PACKET_SIZE];
+ unsigned int localPort = 8888;
-EthernetUDP Udp;
+ const int NTP_PACKET_SIZE= 48;
+ byte packetBuffer[NTP_PACKET_SIZE];
-void setup() {
+ EthernetUDP Udp;
-  // Set the clock to run-mode, and disable the write protection
-  rtc.halt(false);
+ void setup() {
-  rtc.writeProtect(false);
+   // Set the clock to run-mode, and disable the write protection
+   rtc.halt(false);
-  // Setup Communication
+   rtc.writeProtect(false);
-  Serial.begin(9600);
-  Ethernet.begin(mac);
+   // Setup Communication
-  Udp.begin(localPort);
+   Serial.begin(9600);
+   Ethernet.begin(mac);
+   Udp.begin(localPort);
-  Serial.print("get time");
-  setSyncInterval(10); // Set seconds between re-sync
+   Serial.print("get time");
-  getNtpTime;
+   setSyncInterval(10); // Set seconds between re-sync
+   getNtpTime;
-  // The following lines can be commented out to use the values already stored in the DS1302
-  rtc.setDOW(WEDNESDAY);        // Set Day-of-Week to MONDAY
+   // The following lines can be commented out to use the values already stored in the DS1302
-  // rtc.setTime(13, 0, 0);     // Set the time to 12:00:00 (24hr format)
+   rtc.setDOW(WEDNESDAY);        // Set Day-of-Week to MONDAY
-  rtc.setDate(30, 5, 2018);   // Set the date to Feb 2, 2016
+   // rtc.setTime(13, 0, 0);     // Set the time to 12:00:00 (24hr format)
+   rtc.setDate(30, 5, 2018);   // Set the date to Feb 2, 2016
-−
+ }
 void loop() {
-  setSyncProvider(getNtpTime);
+ void loop() {
+   setSyncProvider(getNtpTime);
-  rtc.setTime(hour()+7, minute(), second());
+   rtc.setTime(hour()+7, minute(), second());
-  // Send Day-of-Week
-  Serial.print(rtc.getDOWStr());
+   // Send Day-of-Week
-   Serial.print(" ");
+   Serial.print(rtc.getDOWStr());
-  // Send date
+   // Send time
-  Serial.print(rtc.getDateStr());
+   Serial.println(rtc.getTimeStr());
-  Serial.print(" -- ");
-  // Send time
+ unsigned long getNtpTime()
-  Serial.println(rtc.getTimeStr());
+   sendNTPpacket(timeServer); // send an NTP packet to a time server
-  getNtpTime;
+     delay(500);
-    if ( Udp.parsePacket() ) {
+     if ( Udp.parsePacket() ) {
-     Udp.read(packetBuffer,NTP_PACKET_SIZE);
+      Udp.read(packetBuffer,NTP_PACKET_SIZE);
-     unsigned long hi = word(packetBuffer[40], packetBuffer[41]);
+      unsigned long hi = word(packetBuffer[40], packetBuffer[41]);
-     unsigned long low = word(packetBuffer[42], packetBuffer[43]);
+      unsigned long low = word(packetBuffer[42], packetBuffer[43]);
-     unsigned long secsSince1900 = hi << 16 | low;
+      unsigned long secsSince1900 = hi << 16 | low;
-     const unsigned long seventyYears = 2208988800UL;
+      const unsigned long seventyYears = 2208988800UL;
-     unsigned long epoch = secsSince1900 - seventyYears;
+      unsigned long epoch = secsSince1900 - seventyYears;
-     return epoch;
+      return epoch;
-−
+   }
-  return 0; // return 0 if unable to get the time
+   return 0; // return 0 if unable to get the time
-−
+ }
-−
-unsigned long sendNTPpacket(IPAddress& address)
+ unsigned long sendNTPpacket(IPAddress& address)
-−
+ {
-  memset(packetBuffer, 0, NTP_PACKET_SIZE);  // set all bytes in the buffer to 0
+   memset(packetBuffer, 0, NTP_PACKET_SIZE);  // set all bytes in the buffer to 0
-−
-  // Initialize values needed to form NTP request
+   // Initialize values needed to form NTP request
-  packetBuffer[0] = B11100011;   // LI, Version, Mode
+   packetBuffer[0] = B11100011;   // LI, Version, Mode
-  packetBuffer[1] = 0;     // Stratum
+   packetBuffer[1] = 0;     // Stratum
-  packetBuffer[2] = 6;     // Max Interval between messages in seconds
+   packetBuffer[2] = 6;     // Max Interval between messages in seconds
-  packetBuffer[3] = 0xEC;  // Clock Precision
+   packetBuffer[3] = 0xEC;  // Clock Precision
-  // bytes 4 - 11 are for Root Delay and Dispersion and were set to 0 by memset
+   // bytes 4 - 11 are for Root Delay and Dispersion and were set to 0 by memset
-  packetBuffer[12]  = 49;  // four-byte reference ID identifying
+   packetBuffer[12]  = 49;  // four-byte reference ID identifying
-  packetBuffer[13]  = 0x4E;
+   packetBuffer[13]  = 0x4E;
-  packetBuffer[14]  = 49;
+   packetBuffer[14]  = 49;
-  packetBuffer[15]  = 52;
+   packetBuffer[15]  = 52;
-−
-  // send the packet requesting a timestamp:
+   // send the packet requesting a timestamp:
-  Udp.beginPacket(address, 123); //NTP requests are to port 123
+   Udp.beginPacket(address, 123); //NTP requests are to port 123
-  Udp.write(packetBuffer,NTP_PACKET_SIZE);
+   Udp.write(packetBuffer,NTP_PACKET_SIZE);
-  Udp.endPacket();
+   Udp.endPacket();
-−
+ }

Arduino: RTC DS1302 NTP Sync - Revision history

Onnowpurbo at 09:48, 30 May 2018

Onnowpurbo: Created page with "// time ntp RTC DS1302 set #include #include #include #include #include // Init the DS1302 // DS1302 rtc([CE/RST], [..."